Heatilator
Heatilator Caliber Series Indoor Gas Fireplace - 42", Natural Gas (NG) with Cambree front, New Bronze
SKU: CAL42+CAMBREE42-NB | Model Number: CAL42+CAMBREE42-NB





Description
Your package includes
- Heatilator Caliber Direct Vent Gas Fireplace - 42", Natural Gas (NG) (CAL42)
- Cambree front, New Bronze (CAMBREE42-NB)
The Heatilator Caliber 36" is a traditional direct vent gas fireplace with a top or rear vent, IntelliFire Touch ignition and six ceramic fiber logs. Your front is included in this package, so choose it with the buttons above. This model is set up for natural gas (NG).
Features and included items
- 12 ft Wall switch wire
- Tempered glass
- 6 ceramic fiber logs
- Junction box
- Gas flex connector
- Battery backup
Details
- Model: Caliber 36"
- Fuel: Natural Gas
- Heat input: 35,000 BTU/hr NG, 34,000 BTU/hr LP
- Viewing area: W 41-1/4" x H 26-11/16"
- Framing: W 49" x H 40-1/8" x D 22"
- Overall size: H 41-7/8" x W 48-1/16" x D 21-1/2"
- Glass: tempered
What you will need
- The front in this package, plus any optional add-ons you choose below
- A gas line and a qualified installer
- Venting as listed in the installation manual
Build your fireplace. The choices you made above are included in this package. Everything below is sold separately and added to your quote on its own. Click a photo to see the product, choose your size or finish, and add it to your quote.
Optional add-ons
Refractory, brick and liners
Venting and outside air

Heat out kit (includes termination cap, 25' of 6" round duct, fireplace adapter, damper, wall switch and 350CFM fan at

Heat-Zone Kit includes fan, 20' of 6" round duct, vent, wall adapter & on/off control. Wire Plug Assembly 26D0619 required if
Doors and screens
Fronts and trim

Passive Heat Kit starting collars (requires a side or front trim kit or use open top chase)

Passive Heat Vent Trim Kit For Front Discharge (42")(Starting collars sold separately)

Passive Heat trim kit for side discharge (includes 2 side registers)
Mantels and shelves

Acadia Mantel

Battlefield Mantel

Baxter Mantel Shelf

Crosby Mantel Shelf

Kenwood Mantel

Laurel Mantel

Malone Mantel

Merritt Mantel

Richland Flush Mantel, Primed MDF

Roxborough Mantel

Slate Legs 37.25X7X5/8 (must be ordered in multiples of 50)

Walker Mantel

Wescott Mantel

Zimmer Mantel
Heat, fans and blowers

Exterior Heat-Zone brick extension kit

Fan kit 160 CFM (fan only)

Fan kit 160 CFM (includes rheostat and temperature sensor)

IntelliFire Touch AUX Module. Must order if adding Fan, Lights or Power Vent and want to use the IFT-WFM. Do not need to

IntelliFire Wi-Fi Module that works with the IntelliFire iOS and Android app. Use to control all the features of your fireplace via a smart device. An RC400, RC450 or RC150 is required for thermostat

Required adaptor for HEAT-ZONE-GAS when not being paired with Passive Heat
Controls and lighting

Battery backup wall switch kit for units with IFT control systems. Includes: On/Off Wall Switch, USB-C Port, Battery Backup, Cover Plate, 12' Wire Harness

IntelliFire Touch white wireless wall switch
Other options and kits

3 Pc - 2-Sided Reflective Black Glass/Matte Glass Liner (Caliber) - GL-42M

Corbels (2), Primed MDF

Fillmore Mantel Shelf

Kenwood - Optional Base Maple Unfinished - HTKDAUC

Kenwood - Optional Base Primed MDF - HTKDMPC

Non-Combustible Mantel Shelf

Ozark Mantel Shelf

Slate Header 57X8X5/8 (must be ordered in multiples of 25)

Slate Hearth 70X20X5/8 (must be ordered in multiples of 25)

Stone Surround Sets
Order notes
- Special order. Lead time is typically 3-8 business days from the manufacturer. Call for exact lead times.
- Colors and finishes on screen can vary. Ask us for samples.
- Install by a qualified installer. Follow the Installation Manual for clearances, venting and framing.
Guides and videos
Planning and design: spec sheets, architect guides, brochures
Installation and service: manuals
Add-on and accessory instructions
- BRICK-6K-8K BRICK-36M-42M BRICK36MCS-42MCS installation instructions
- FOLIO CALI CAMBREE ESSENCE CAULDRON installation instructions
- GL-36M GL-42M GL-36MX GL-42MX installation instructions
- HZMR-ADP installation instructions
- PH-MR installation instructions
- Intellifire touch controls field service guide
- Ift-acm install manual
- Ift-rc150 remote install manual
- Ift-rc150 remote user guide
- Ift-rc400 remote user guide
- Ift-rc400 / ift-acm install manual
- Intellifire wi-fi module instructions
Using and caring for your fireplace: videos and maintenance
- Gas fireplace operation
- How to clean the glass
- Gas fireplace odors
- Using your fireplace in a power outage
- Fireplace Maintenance Checklist
Troubleshooting and help: videos, FAQs, model and serial number
- Gas fireplace troubleshooting
- Resetting your IntelliFire Plus ignition system
- How to find your model and serial number
- Heatilator Troubleshooting & FAQs
- Heatilator on YouTube
Warranty
Product Specifications
Framing Dimensions | W 49" x H 40-1/8" x D 22" |


