Cornerite XRIT, 2 in x 2 in x 4 ft

Cornerite reinforcing angle is used to reinforce all inside or inner plaster corners to reduce corner cracking.

This product is intended for:

• Cornerite reinforcing angle is formed from finished, edge strip lath and bent lengthwise to a 100° angle ensuring a snug fit into 90° inside corners and over 90° outside.
• Cornerite is commonly used where walls meet walls or ceilings, over inner angles of masonry construction, and when using the floating-angle-method of applying gypsum.
• Cornerite reinforcing angle should be tied to the base lath using 18-gauge tie wire.

Works with:

• Metal lath and stucco on the wall.
• Screws or nails and staples to fasten, as the product allows.

Choose yours: pick the size

• XRIT: Size 2 in x 2 in x 4 ft; 125 pcs per carton
• XRIT: Size 2 in x 2 in x 8 ft; 75 pcs per carton
• XRIT: Size 3 in x 3 in x 8 ft; 75 pcs per carton

Key facts

• It should not be attached directly to the support framing but allowed to float in the corner.
• Galvanized steel products should not be used with magnesium oxychloride cement stucco or Portland cement stucco containing calcium chloride additives.

Documents

Submittal / spec sheet | Safety data sheet

Special order item. Request a quote and our team will confirm price, availability and quantities for your job.