All Products

>

Fasteners & Connectors

>

Structural Hardware & Connectors

>

Joist Hangers

MiTek

MiTek / USP Structural Connectors 3 1/2 x 10/10 Joist Hanger 50

SKU: JUS410 | Model Number: JUS410

$564 /each

Breaux Bridge

14 In Stock

Check inventory at other locations

In-Store Pick-Up

Delivery Available

Fulfillment options will be available at the checkout.

Description

MiTek / USP Structural Connectors 3 1/2 x 10/10 Joist Hanger 50 is a face-mount joist hanger from MiTek.

Face-mount joist-to-header connection.

Size: 3-1/2x10/12; Material: 18-gauge steel; Finish: Standard; Design: Slant/double-shear nailing — dimple allows 30°-45° nailing through joist into header for higher loads with fewer nails.

Documents & Resources

Installation

  • Use all specified fasteners.
  • Joist nails must be driven at a 30° to 45° angle through the joist or truss into the header to achieve listed loads. Slant/double shear nails must be used to achieve listed load values.
  • JUS – 16d sinkers (0.148" x 3-1/4") may be used where 10d commons are specified with no load reduction.

Official MiTek Product Page

Product Specifications

Configuration

Single

Design

Slant/double-shear nailing — dimple allows 30°-45° nailing through joist into header for higher loads with fewer nails

Fastening

10d nails (0.148 in x 3 in); 16d sinkers (0.148 in x 3-1/4 in) may substitute with no load reduction

Finish

Standard

Material

18-gauge steel

Nominal Lumber Size

3-1/2x10/10

Product Type

Face-Mount Joist Hanger

Size

3-1/2x10/12

Use

Face-mount joist-to-header connection