MiTek
MiTek THDH414 12-Gauge High-Capacity Truss / SCL Hanger — 4x14
SKU: THDH414 | Model Number: THDH414
$6908 /each
Breaux Bridge
10 In Stock
Check inventory at other locations
In-Store Pick-Up
Delivery Available
Description
MiTek THDH414 12-Gauge High-Capacity Truss / SCL Hanger — 4x14 is a high-capacity face-mount truss / scl hanger from MiTek (model/MPN THDH414).
Series: THDH; Material: 12-gauge steel; Finish: G90 galvanizing.
Documents & Resources
- MiTek Product Catalog — 62nd Edition
- Warranty Information
- Code / Evaluation Report
- Product Information
- Doug Ashy Fasteners / Hardware (Decking) Buying Guide
- MiTek THDH414 masonry application bulletin
Installation
- Use all specified fasteners.
- Joist nails must be driven in at a 30° to 45° angle through the joist or truss into the header to achieve listed loads. Standard length "double shear" nails must be used to achieve listed load values.
Product Specifications
Applications | Truss-to-truss and structural composite lumber connections including LVL, PSL and LSL |
Code Reports | ICC-ES ESR-3445; Florida FL17232; LABC ESR-3445 |
Design Resource | Use exact THDH model specification/load table for fasteners and allowable values |
Double-Shear Nailing | Joist/truss nails driven 30°–45° through supported member into header |
Finish | G90 galvanizing |
Installation | Use all specified fasteners; standard-length double-shear nails are required to achieve listed loads |
Manufacturer Model | THDH414 |
Material | 12-gauge steel |
Nominal Member Size | 4x14 |
Product Type | High-Capacity Face-Mount Truss / SCL Hanger |
Series | THDH |
