MiTek RPB-TZ 12-Gauge Retrofit Post Base — G-185 is a retrofit post base from MiTek (model/MPN RPB-TZ).

Material: 12-gauge steel; Finish: G-185 galvanizing.

Documents & Resources

• MiTek Product Catalog — 62nd Edition
• Warranty Information
• Code / Evaluation Report
• Product Information
• Doug Ashy Fasteners / Hardware (Decking) Buying Guide
• MiTek RPB-TZ — exact retrofit post base product/load page

Installation

• MiTek’s WS structural wood screws and screw anchors are not included with RPB bases. Install with specified fasteners as listed in the load table.
• Not recommended for fence posts or other unrestrained (not fixed or fastened at top) applications. These anchors are not designed to resist overturning (moment) loads.
• Concrete Installation: (1) Place RPB-TZ over one corner of post flush to both concrete and post surfaces and mark hole locations in concrete. (2) Drill holes for concrete screws using appropriate bit and hammer drill. (3) Place RPB-TZ in position and install with specified fasteners. (4) Repeat for RPB-TZ on other side of post for double installations.
• Wood-to-Wood Installation: (1) Place RPB-TZ over one corner of post flush to wood base and post surfaces. (2) Install all specified WS structural wood screws. (3) Repeat for RPB-TZ on other side of post for double installations.

Official MiTek Product Page