MiTek
MiTek PAU66-TZ Heavy-Uplift Post Anchor — 6x6
SKU: PAU66-TZ | Model Number: PAU66-TZ
$6372 /each
Breaux Bridge
13 In Stock
Check inventory at other locations
In-Store Pick-Up
Delivery Available
Description
MiTek PAU66-TZ Heavy-Uplift Post Anchor — 6x6 is a higher-uplift wood-to-concrete post anchor from MiTek (model/MPN PAU66-TZ).
Series: PAU; Finish: TZ corrosion-resistant model; Design: Higher uplift resistance with optional bolt fastening to post.
Documents & Resources
- MiTek Product Catalog — 62nd Edition
- Warranty Information
- Code / Evaluation Report
- Product Information
- Doug Ashy Fasteners / Hardware (Decking) Buying Guide
Installation
- Use all specified fasteners. Install with supplied washer.
- Anchor bolts and nails are not furnished.
- Not recommended for fence posts or other unrestrained (not fixed or fastened at top) applications. These anchors are not designed to resist overturning (moment) loads.
- Anchor bolt installation – place specified diameter anchor bolt at desired location with minimum 4" embedment into minimum 2,500 psi concrete. A minimum 2" edge distance from the outermost edge of the post base to the edge of the concrete is required to achieve allowable loads.
Product Specifications
Code Reports | ICC-ES ESR-3449; Florida FL17239; LABC ESR-3449 |
Concrete Installation | Specified anchor bolt with minimum 4-in embedment into minimum 2,500-psi concrete |
Design | Higher uplift resistance with optional bolt fastening to post |
Finish | TZ corrosion-resistant model |
Manufacturer Model | PAU66-TZ |
Minimum Concrete Edge Distance | 2 in from outermost post-base edge to concrete edge for allowable loads |
Nominal Post Size | 6x6 |
Product Type | Higher-Uplift Wood-to-Concrete Post Anchor |
Restriction | Not recommended for fence/unrestrained posts; not designed to resist overturning/moment loads |
Retrofit Option | Specified threaded rod with adhesive epoxy may be used in cured concrete per MiTek instructions |
Series | PAU |
Standoff | 1 in |
