Hearth & Home Technologies

Hearth & Home Technologies Heat Zone Duct Kit for Primo II and Vellis II (LPR-HEAT-DUCT)

SKU: LPR-HEAT-DUCT | Model Number: LPR-HEAT-DUCT

Pricing available upon request

Description

The Heat Zone duct kit from Hearth & Home Technologies lets a Primo II or Vellis II linear fireplace send a small amount of heat to the same room or to another part of the house. The kit includes a 25 ft length of 6" insulated flex duct, a unit collar and gasket, a duct boot, a white register cover, two gear clamps and the screws. The total duct run can be 3 to 25 ft, and the register must be at least 3 ft from the fireplace opening and 18" from anything that can burn. The register can be in a wall or ceiling, and on the same floor or one level above or below. Installation should be done by a qualified installer following the manufacturer's instructions and local code. Special order.

Product Specifications

Compatible With

Primo II 48, 60 and 72, Primo II 48ST, 60ST and 72ST, Vellis II 48, 60 and 72, and Vellis II 48ST, 60ST and 72ST direct vent gas fireplaces