Vented "F" Channel Reveal - Surface Mount FDCV50-200SE, 2 in / 1/2 in

Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.

This product is intended for:

• Designed for surface-mount installations when a vented reveal is required at the juncture of a wall and ceiling.
• Always use a rigid backing or blocking material behind surface-mounted reveals.
• Vent clips are provided with vented channel reveals to connect reveal sections and assist in alignment.

Works with:

• Metal lath and stucco on the wall.
• Screws or nails and staples to fasten, as the product allows.

Choose yours: pick the reveal and minimum board thickness

• FDCV50-150SE: Finish thickness 1/16 in - 3/32 in, Minimum board thickness 1/2 in, Reveal 1-1/2 in, Perforated flanges 1-1/8 in; 25 pcs per box
• FDCV50-200SE: Finish thickness 1/16 in - 3/32 in, Minimum board thickness 1/2 in, Reveal 2 in, Perforated flanges 1-1/8 in; 25 pcs per box
• FDCV50-300SE: Finish thickness 1/16 in - 3/32 in, Minimum board thickness 1/2 in, Reveal 3 in, Perforated flanges 1-1/8 in; 20 pcs per box
• FDCV58-150SE: Finish thickness 1/16 in - 3/32 in, Minimum board thickness 5/8 in, Reveal 1-1/2 in, Perforated flanges 1-1/8 in; 20 pcs per box
• FDCV58-200SE: Finish thickness 1/16 in - 3/32 in, Minimum board thickness 5/8 in, Reveal 2 in, Perforated flanges 1-1/8 in; 20 pcs per box
• FDCV58-300SE: Finish thickness 1/16 in - 3/32 in, Minimum board thickness 5/8 in, Reveal 3 in, Perforated flanges 1-1/8 in; 20 pcs per box

Key facts

• Caulk all intersections, butt joints, ends, and corners at the time of installation.
• Not to be used in lieu of control joints or expansion joints.
• Factory-fabricated intersections are also available for all ClarkDietrich channel reveals.

Documents

Submittal / spec sheet | Safety data sheet

Special order item. Request a quote and our team will confirm price, availability and quantities for your job.