Vented Channel Reveal - Surface Mount DCV50-300SE, 3 in / 1/2 in

This vent is intended for surface-mount applications.

This product is intended for:

• Always use a rigid backing or blocking material behind surface-mounted reveal.
• Vented channel reveals facilitate perimeter air flow to assist in moisture management and temperature control.
• This vent is intended for surface-mount applications.

Works with:

• Metal lath and stucco on the wall.
• Screws or nails and staples to fasten, as the product allows.

Choose yours: pick the reveal width and minimum board thickness

• DCV50-150SE: Finish thickness 1/16 in - 3/32 in, Minimum board thickness 1/2 in, Reveal width 1-1/2 in, Perforated flanges 1-1/8 in; 25 pcs per box
• DCV50-200SE: Finish thickness 1/16 in - 3/32 in, Minimum board thickness 1/2 in, Reveal width 2 in, Perforated flanges 1-1/8 in; 25 pcs per box
• DCV50-300SE: Finish thickness 1/16 in - 3/32 in, Minimum board thickness 1/2 in, Reveal width 3 in, Perforated flanges 1-1/8 in; 20 pcs per box
• DCV58-150SE: Finish thickness 1/16 in - 3/32 in, Minimum board thickness 5/8 in, Reveal width 1-1/2 in, Perforated flanges 1-1/8 in; 20 pcs per box
• DCV58-200SE: Finish thickness 1/16 in - 3/32 in, Minimum board thickness 5/8 in, Reveal width 2 in, Perforated flanges 1-1/8 in; 20 pcs per box
• DCV58-300SE: Finish thickness 1/16 in - 3/32 in, Minimum board thickness 5/8 in, Reveal width 3 in, Perforated flanges 1-1/8 in; 20 pcs per box

Key facts

• Perforated flanges allow the base coat mixture to easily flow through and bond with the substrate.
• Vent clips are provided with vented channel reveals to connect reveal sections and assist in alignment.
• Caulk all intersections, butt joints, ends, and corners at the time of installation.
• Not to be used in lieu of control joints or expansion joints.

Documents

Submittal / spec sheet | Safety data sheet

Special order item. Request a quote and our team will confirm price, availability and quantities for your job.