Strut Plate SP7-54, 4 in x 7 in / 0.0566 in

Vertical movement up to 2-1/2 in (1-1/4 in up and 1-1/4 in down) Reduces framing buildup Proprietary Deflection Screws included.

Works with:

• Steel studs in the wall it connects.
• Self-drilling metal screws or powder-actuated fasteners to attach.

Choose yours: pick the connector dimensions and design thickness

• SP7-54: Design thickness 0.0566 in, Connector Dimensions 4 in x 7 in
• SP7-68: Design thickness 0.0713 in, Connector Dimensions 4 in x 7 in
• SP9-54: Design thickness 0.0566 in, Connector Dimensions 4 in x 9 in
• SP9-68: Design thickness 0.0713 in, Connector Dimensions 4 in x 9 in
• SP11-54: Design thickness 0.0566 in, Connector Dimensions 4 in x 11 in
• SP11-68: Design thickness 0.0713 in, Connector Dimensions 4 in x 11 in
• SP13-54: Design thickness 0.0566 in, Connector Dimensions 4 in x 13 in
• SP13-68: Design thickness 0.0713 in, Connector Dimensions 4 in x 13 in

Install

• Align the plate at the connection point so the attachment surface is flush with the stud web and oriented to allow vertical movement.
• Fasten the plate to the primary stud using four (4) #10 self-drilling screws in the fixed holes.
• Attach the adjoining stud using two (2) proprietary deflection screws through the slotted holes.
• Verify the connection permits vertical movement and does not transfer vertical loads.

Documents

Submittal / spec sheet | Safety data sheet | Code report | CAD and BIM

Special order item. Request a quote and our team will confirm price, availability and quantities for your job.