RedHeader PRO 600PRO350-68, 6 in web, 3-1/2 in flange, 68 mil (14 ga).

One-piece steel header or jamb that replaces boxed headers and built-up jambs around door and window openings.

This product is intended for:

• Door and window rough openings in interior or exterior steel-stud walls, in place of boxed headers and built-up jambs.
• Jobs that want fewer pieces and screws: one header or jamb piece replaces a built-up member.

This product is not intended for:

• Walls without openings. Standard steel studs and track do the job.
• Lighter-duty openings. RedHeader Lite is made for them.

Works with:

• HDSC header brackets. The header slides into the bracket. Brackets are sold in pairs.
• Steel studs for the wall around the opening.
• Screws to fasten.

Choose yours

• Pick the web size to match your wall: 3-5/8, 4, 6 or 8 in.
• Pick a 3 in or 3-1/2 in flange. The 3-1/2 in flange is made in 54 mil and thicker.
• Thicker steel carries more load. 33 and 43 mil use 33 ksi, 54 mil and up use 50 ksi.
• Order headers 1/2 in shorter than the opening so they fit inside the clips.

Key facts

• Replaces boxed or lay-in headers and built-up jambs. Cuts material pieces and screws by up to 50%.
• Slides into the HDSC header bracket. A jamb needs no track or screws to build up.
• Pre-cut headers (4 ft and over) available on minimum quantity orders of 30.
• Standard coating is CP60 per ASTM C955. G90 available.

Install

Slide the header into the clips and fasten to the jambs. Follow the RedHeader PRO catalog for clip placement.

Video not showing? Watch the install video on YouTube.

Documents

Submittal / spec sheet | Safety data sheet | Code report | CAD and BIM

Special order item. Request a quote and our team will confirm price, availability and quantities for your job.