2 in (Nominal) J-Weep Low-Back JWLBw/WeepHolesJCLBw/oWeepHoles, 1-3/8 in

2 in Nominal J-Weep Low-Back (2-inch back flange) is commonly used as a straight edge plaster stop at the top of doors and windows over traditional head flashings.

This product is intended for:

• J-Weep Low-Back is nail, screw, or staple-attached to the frame or sheathing, then foam insulation, cement board or metal lath can be installed over it.
• In any case, the protruding ridge of the metal must extend beyond the plane of overlaid materials to serve as a ground for the stucco or E.I.F.S. application.
• Installed in conjunction with 1 in rigid insulation associated with one-coat plaster stucco systems, the 1-3/8 in ground provides proper depth for plaster keying.

Works with:

• Metal lath and stucco above the screed.

Choose yours: pick the grounds

• JWLBw/WeepHolesJCLBw/oWeepHoles: Grounds 1/2 in, Flange Height 2 in, Length 10 ft, Lbs./Ft. .16 lbs.; 10 pcs per carton
• JWLBw/WeepHolesJCLBw/oWeepHoles: Grounds 3/4 in, Flange Height 2 in, Length 10 ft, Lbs./Ft. .18 lbs.; 10 pcs per carton
• JWLBw/WeepHolesJCLBw/oWeepHoles: Grounds 1-3/8 in, Flange Height 2 in, Length 10 ft, Lbs./Ft. .22 lbs.; 10 pcs per carton

Key facts

• The 2 in (Nominal) J-Weep has an attachment flange that measures 1-7/8 in.
• Galvanized for corrosion protection, it also is available with weep holes.
• 2 in (Nominal) J-Weep should not be used as a foundation weep screed for three-coat stucco applications.
• This casing or plaster stop bead should only be used on approved one-coat systems.

Documents

Submittal / spec sheet | Safety data sheet

Special order item. Request a quote and our team will confirm price, availability and quantities for your job.