MiTek
MiTek / USP Structural Connectors Double 2 x 4 Slant Nail Hanger 50
SKU: JUS24-2 | Model Number: JUS24-2
$413 /each
Breaux Bridge
Out of Stock
Check inventory at other locations
In-Store Pick-Up
Delivery Available
Description
MiTek / USP Structural Connectors Double 2 x 4 Slant Nail Hanger 50 is a face-mount joist hanger from MiTek.
Face-mount joist-to-header connection.
Size: 2x4; Material: 18-gauge steel; Finish: Standard; Design: Slant/double-shear nailing — dimple allows 30°-45° nailing through joist into header for higher loads with fewer nails.
Documents & Resources
- MiTek Product Catalog — 62nd Edition
- Warranty Information
- Code / Evaluation Report
- Product Information
- Doug Ashy Fasteners / Hardware (Decking) Buying Guide
Installation
- Use all specified fasteners.
- Joist nails must be driven at a 30° to 45° angle through the joist or truss into the header to achieve listed loads. Slant/double shear nails must be used to achieve listed load values.
- JUS – 16d sinkers (0.148" x 3-1/4") may be used where 10d commons are specified with no load reduction.
Product Specifications
Configuration | Double |
Design | Slant/double-shear nailing — dimple allows 30°-45° nailing through joist into header for higher loads with fewer nails |
Fastening | 10d nails (0.148 in x 3 in); 16d sinkers (0.148 in x 3-1/4 in) may substitute with no load reduction |
Finish | Standard |
Material | 18-gauge steel |
Nominal Lumber Size | 2x4 (double) |
Product Type | Face-Mount Joist Hanger |
Size | 2x4 |
Use | Face-mount joist-to-header connection |
