MiTek
MiTek TA51-TZ 12-Gauge Foundation Strap — 2 x 48 in
SKU: TA51TZ | Model Number: TA51-TZ
$2349 /each
Description
MiTek TA51-TZ 12-Gauge Foundation Strap — 2 x 48 in is a cast-in-place foundation strap from MiTek (model/MPN TA51-TZ).
Series: TA; Material: 12-gauge steel; Finish: TZ corrosion-resistant model.
Documents & Resources
- MiTek Product Catalog — 62nd Edition
- Warranty Information
- Code / Evaluation Report
- Product Information
- Doug Ashy Fasteners / Hardware (Decking) Buying Guide
- MiTek TA Foundation Straps — exact TA51-TZ load/application page
Installation
- Use all specified fasteners. Allowable loads are based on either nail fastening or bolt fastening; nail and bolt values cannot be combined.
- Install by inserting product into footing’s wet concrete. All models require a 6" embedment into concrete foundations. Courses of concrete block must be laid over connector. Notch mudsill at connector locations. Wrap strap over rim joist and fasten.
- Do not rely on these straps to secure concrete sections together between cold joints; take other measures to transfer the load.
- Allowable loads are based on a minimum concrete compressive strength of 2,500 psi at 28 days.
Product Specifications
Catalog Dimensions | 2 x 48 in |
Code Listing | No code listing shown by MiTek for TA51-TZ |
Cold-Joint Rule | Do not rely on TA strap to secure concrete sections together across cold joints |
Concrete Embedment | 6 in minimum into footing |
Concrete Strength | Allowable loads based on minimum 2,500-psi concrete at 28 days |
Fastening Choice | Nail and bolt allowable-load values cannot be combined |
Finish | TZ corrosion-resistant model |
Installation | Insert into wet footing concrete; lay block over connector; notch mudsill at connector; wrap strap over rim joist and fasten |
Load-Path Application | Continuous load path from 2x8 to 2x14 rim joist through concrete block to foundation |
Manufacturer Model | TA51-TZ |
Material | 12-gauge steel |
Product Type | Cast-In-Place Foundation Strap |
Series | TA |
