MiTek
MiTek JUS26-TZ Slant-Nail Joist Hanger — 2x6/2x8
SKU: JUS26-TZ | Model Number: JUS26-TZ
$225 /each
Breaux Bridge
3058 In Stock
Check inventory at other locations
In-Store Pick-Up
Delivery Available
Description
MiTek JUS26-TZ Slant-Nail Joist Hanger — 2x6/2x8 is a slant-nail face-mount joist hanger from MiTek (model/MPN JUS26-TZ).
Series: JUS; Material: 18-gauge steel; Finish: TZ corrosion-resistant model; confirm exposure suitability from MiTek corrosion table.
Documents & Resources
- MiTek Product Catalog — 62nd Edition
- Warranty Information
- Code / Evaluation Report
- Product Information
- Doug Ashy Fasteners / Hardware (Decking) Buying Guide
- MiTek JUS Series — exact JUS26-TZ code/install/load page
Installation
- Use all specified fasteners.
- Joist nails must be driven at a 30° to 45° angle through the joist or truss into the header to achieve listed loads. Slant/double shear nails must be used to achieve listed load values.
- JUS – 16d sinkers (0.148" x 3-1/4") may be used where 10d commons are specified with no load reduction.
Product Specifications
Code Reports | ICC-ES ESR-3445; Florida FL17232; LABC ESR-3445 |
Design Resource | Use exact JUS26-TZ MiTek load/application table |
Fastener Substitution | 16d sinkers (0.148 x 3-1/4 in) may replace specified 10d commons with no load reduction where MiTek permits |
Finish | TZ corrosion-resistant model; confirm exposure suitability from MiTek corrosion table |
Installation | Use all specified fasteners; listed loads require slant/double-shear joist nails |
Manufacturer Model | JUS26-TZ |
Material | 18-gauge steel |
Nailing | Double-shear/slant nailing through joist into header at 30°–45° |
Nominal Lumber Size | 2x6 / 2x8 application family |
Product Type | Slant-Nail Face-Mount Joist Hanger |
Series | JUS |
