MiTek
MiTek IHF2316 16-Gauge Face-Mount I-Joist Hanger — 2-5/16 x 16 in
SKU: IHF2316 | Model Number: IHF2316
Description
MiTek IHF2316 16-Gauge Face-Mount I-Joist Hanger — 2-5/16 x 16 in is a face-mount i-joist hanger from MiTek (model/MPN IHF2316).
Series: IHF; Material: 16-gauge steel; Finish: G90 galvanizing.
Documents & Resources
- MiTek Product Catalog — 62nd Edition
- Warranty Information
- Code / Evaluation Report
- Product Information
- Doug Ashy Fasteners / Hardware (Decking) Buying Guide
Installation
- Use all specified fasteners.
- Position I-joist into hangers and tap or push into place to fully seat joist and engage cleats.
- Web stiffeners are not required unless specified by the I-joist manufacturer.
- Min Nailing – Fill all round nail holes. Max Nailing – Fill all round and diamond holes.
- IHFL – For additional uplift capacity, install (2) 10d (0.148") x 1-1/2" nails through diamond dimple holes into the bottom chord of I-joist member for a total uplift of 220 lbs. IHF – Uplift capacity for hangers installed without joist nails is 65 lbs.
Product Specifications
Code Reports | ICC-ES ESR-3445; Florida FL17232; LABC ESR-3445 |
Finish | G90 galvanizing |
Manufacturer Model | IHF2316 |
Material | 16-gauge steel |
Max Nailing | Fill all round and diamond holes |
Min Nailing | Fill all round nail holes |
Product Type | Face-Mount I-Joist Hanger |
Seat Cleats | Engage bottom flange of I-joist |
Series | IHF |
Supported I-Joist | 2-5/16 x 16 in |
Temporary Placement | Speed prongs support temporary positioning |
Uplift Without Joist Nails | 65 lb for IHF family per MiTek |
Web Stiffeners | Not required unless specified by I-joist manufacturer |
